Installation Guides

Proper installation is essential for your door to function correctly, seal effectively, and in some cases meet fire and safety ratings. Below are general guidelines – if you’re unsure about any step, contact us for assistance before you begin.

Before You Start

Confirm the opening has been measured correctly (see our Measuring Guide).
Unpack and inspect the door for damage before installation – do not install a damaged door.
Allow the door to acclimatise to the room’s temperature and humidity for 24-48 hours before fitting, where possible.

Fire Door Installation

Fire-rated doors must be installed by a competent installer in line with the manufacturer’s instructions and local building regulations. Incorrect installation – including the wrong frame, hinges, seals, or hardware – can void the door’s fire rating. If your project requires certified fire door installation, we recommend using a qualified fire door installer.

General Fitting Steps

Fit the frame first and check it is square and plumb before securing.
Hang the door on its hinges and check it opens and closes smoothly without catching.
Fit intumescent and smoke seals (fire doors) or weather seals (exterior doors) continuously around the frame.
Install door furniture (handles, locks, closers) according to the manufacturer’s instructions.
Test the door operates correctly, including any self-closing mechanism, before considering installation complete.

Need Help?

If you have questions about installing your door, contact us and we’ll be happy to help.